K2 MOTOR FLUSH 250ml (T371) - Universal Engine Flush

K2 Motor Flush

is a professional engine flush with a proven formula based on cleaning agents, lubricants, and anti-wear additives. It removes carbon deposits, oil sludge, and soot.

It dissolves contaminants blocking piston rings, increasing their sealing. Tightly sealed rings mean increased compression and reduced oil consumption. K2 Motor Flush dissolves even the oldest carbon deposits, sediment, and other dirt in the engine's lubrication system within minutes. It restores full flow to oil channels.

Thanks to its refined formula and high effectiveness, K2 Motor Flush engine flush:

• removes sediment, carbon deposits, oil sludge, and soot from inside the engine
• restores full flow to oil channels
• reduces smoking and the emission of environmentally harmful exhaust fumes
• increases power by freeing stuck piston rings
• increases compression in cylinders
• reduces oil consumption
• quiets the engine, eliminating noise from valve lifters

Engine flush

K2 Motor Flush can be used in all internal combustion engines – diesel, gasoline, and gas-powered. Special lubricating additives in the flush protect the engine from excessive friction that may occur due to oil dilution after adding the flushing agent. K2 Motor Flush is completely safe for the engine.

It is especially recommended to use K2 Motor Flush engine flush in the following cases:

• driving with oil older than 12 months
• purchasing a car with an unknown engine history
• primarily using the car in urban mode (city driving, short distances)
• engine oil burning (excessive oil consumption)
• excessive "smoking" (black or blue exhaust smoke)
• low compression
• when oil escapes through the breather
• exceeding the recommended oil change interval (driving with overworked oil)

It is recommended to use engine flush at least once a year, preferably with every engine oil change. This will keep the engine clean, increase its efficiency, and extend its lifespan. Black sludge can be permanently eliminated with regular use of the product.

One package is sufficient for 4-6 liters of oil. In the case of heavily contaminated engines, the proportion and working time with the flush can be increased. K2 Motor Flush has been on the market for over 20 years. Verified by thousands of workshops in Poland and abroad. It is recognized as one of the most effective agents in its category.

HOW TO USE:

1. Engine internal flushing should be performed immediately before changing engine oil.
2. Before using the product, check the engine oil level; if it is not correct, top up the oil.
3. Then pour the entire contents of the package into the warm engine.
4. Start the engine and let it run at idle for 10-15 minutes.
5. Then turn off the engine and gravity drain all used oil from the engine.
6. Change the oil filter to a new one.
7. Pour in the appropriate amount of new oil according to the car manufacturer's recommendations.